Why Your Church Isn’t Singing

Are you noticing a lack of congregational participation in your church worship services? Is there a deadpan expression covering their faces? Perhaps a few brave folks are singing while the rest look like they’re bored out of their mind. In Psalm 105:2, David encourages us (God’s children, the church) to sing God’s praises and to tell the world of His wondrous works. There are dozens of other verses in the Bible that speak to the same theme. OK, so where’s the disconnect in our worship services? Let’s explore some of the reasons why and look at how you can remedy the problem. Continue reading “Why Your Church Isn’t Singing”

Why Hymns Still Matter

Why should you use hymns in your church? Why do they still matter? Hymns seem to be quickly falling by the wayside as churches move in the modern era of worship bands and praise songs. It hasn’t always been this way. Throughout the course of its existence, the church has evolved and adapted to reach many cultures of this world. Colossians 3:16 mentions singing psalms, hymns, and spiritual songs with thankfulness in your hearts to God. That’s one of many reasons to be using hymns along side modern worship songs- the Bible says so! Who is actually using hymns in church today? Let’s explore why hymns still matter by taking a quick look at who is… and who isn’t.

Continue reading “Why Hymns Still Matter”

Worship Meets The Modern Era [part 1]

Bands everywhere, in churches and on the road, are using in-ear monitors while they perform. It’s simple: everyone in the band has a metronome click in your ‘headphones’ to keep the tempo steady (we’ll get into what exactly ‘in-ear’ monitors are in just a second). If everyone plays to the same tempo, they will sound more professional and tighter- MUCH tighter. Here’s the thing- some band guys might say something like this: Continue reading “Worship Meets The Modern Era [part 1]”

Our Savior Has Come, a Christmas album

Merry Christmas from the Downtown Revival Band

We would like to share our latest music for the season with you. We’ve spent several months in the studio after hours and on the weekends to bring life to our new versions of these classic Christmas carols and a few new originals. We are calling it, Our Savior Has Come and the cover looks like this:

Our Savior Has Come
“Our Savior Has Come,” a Christmas album by Adam Layne and his Downtown Revival Band

Continue reading “Our Savior Has Come, a Christmas album”

Not Just Another Worship Record

It feels like there’s a new worship record coming out every week these days. With so much material out there, it’s really easy for new-comers to get lost in the noise. Most folks stick to the big, established names that they trust- Chris Tomlin, Kristian Stanfill, Hillsong, etc. With our daily schedules being so busy, why even bother with the names you’ve never heard of? It’s a big hassle. Here’s the thing- I’m one of those new-comers to the worship scene and I’d like to ask you to take a chance on me and listen to my album and share it with your family and friends. I need some grass-roots support to get the word out and you’re exactly the person I need!


Here’s a little history: back in 2007, I was in a band with American Idol top 10 finalist Chris Sligh- the band was called Half Past Forever. We toured a decent amount through the region and Chris and I produced a record. It was basically us sitting in an attic with a computer and a ton of microphones and guitar amps making music for six months. Continue reading “Not Just Another Worship Record”

Les Paul Jimmy Page Re-Wire

The first time I tried to wire the Les Paul with Jimmy Page style wiring, I burned out the internal wipers in the volume pots (the volume was either full-on or only partially down – it wouldn’t cut completely off). Plus, I had some ground buzz problems. I was content to live with these issues for a little while – I mean, for most rock guitarists with a Ernie Ball VP Jr. (passive volume pedal), who needs to turn off the volume anyways?! A few months of this and I couldn’t take it anymore. My OCD tendencies took over and I had to shield and re-wire everything. Here are a few things that I’ve recently acquired that made the job infinitely easier:

Xytronic 168-3C Soldering Station – the best solding tool available for guitarists (be sure to get some quality resin-core solder and 26 gauge wire)

Copper Shielding Tape – makes shielding the control cavity almost too easy

A Good Wiring Diagram – I’ve found several fantastic graphical wiring diagrams from Seymour Duncan – check out their complete free database

A Cardboard Jig – use this to aid in wiring everything but the grounds and pickups before installing (cut a piece out of the shipping box for the soldering station – recycling, ftw) Continue reading “Les Paul Jimmy Page Re-Wire”

Les Paul Graph Tech Nut Install

Ever had issues with your string binding on the nut while tuning only to have them go horribly flat (especially the “G” string) once you’ve starting wailing and bending notes?! I have had this problem on my Les Paul for years and I’ve just lived with it as part of the Les Paul playing experience.

I’ve recently built a new project Telecaster (body/neck from Warmoth.com) and had Graph Tech style nut installed on the Tele neck and it plays like a dream without all the tuning problems. This made it impossible for me to go back to the “tuning hell” of playing the Les Paul. I decided it was time to upgrade the low quality plastic nut with a high-end nut from Graph Tech called the Black Tusq XL. After searching the ‘net for a good deal on Graph Tech stuff, I found a seller on eBay with a good selection of guitar nuts. I bought two just in case I happened to ruin the first attempt (cheap insurance).

Installing a nut was way easier than I thought. Graph Tech has a fantastic walk-thru for this sort of thing (with big pictures)! It’s one thing to read this manual of sorts, but it’s another thing to actually do it. So, here are the highlights of how I did it. I started by removing the strings and the truss rod cover – check out the cheap plastic nut and the graphite paste I was using to cut back on the binding. Continue reading “Les Paul Graph Tech Nut Install”